Comprehensive solutions for fluid and hot pressing applications
Free Proofing，Free Plan，Support Non standard customization
1.1. Basic parameters of the equipment:
Name: Pressure Plate Pump, Empty Bucket Pump, Bucket Cleaning Pump
Model: DEX-YP1.5CC-36H (named according to the screw pump model)
Operating voltage: AC 220V ± 5%, 50 ± 2Hz
Body size: 910mm × 500 × 970 (φ) mm (height of 1370mm after raising the cylinder)
Body weight: approximately 80kg/set (varies depending on the screw pump provided)
Operating environment temperature: 10 ℃~50 ℃
2.1 Screw pump:
Action description: The motor drives the rotor screw to rotate around the axis in the stator cavity, continuously and uniformly discharging the adhesive in the sealed cavity formed between the screw and the stator along the rotor thread line with a constant volume.
internet trafficparameter：
|
model |
rotational speed |
Recommended glue output |
Adhesive pressure |
|
DEX-1.8CC-36H |
0~85rpm/min |
0.18~2.5 ml/s |
36 bar |
|
DEX-5CC-24H |
0~85rpm/min |
0.8~7 ml/s |
24 bar |
|
DEX-15CC-24H |
0~85rpm/min |
2.5~21 ml/s |
24 bar |
|
DEX-24CC-18H |
0~85rpm/min |
4~34 ml/s |
18 bar |
|
*rotational speedaccording tomediumofcharacteristicDifferent with changesWhen facing media with high viscosity, high solid content, high abrasiveness, and poor fluidity, it is advisable to choose a low rotational speed as much as possible. For detailed selection, please contact our engineers. |
|||
Advantages of screw type pressure plate pump:
1. Directly used in conjunction with standard rubber drums (5 gallons), without the need to transfer materials to other containers, can be usedThe waste rate of raw materials has been reduced to an extremely low level.
2. Suitable for media with high viscosity, poor fluidity, and high solid content, with the highest viscosity reaching1000000 PPS.
3. It can be used as a feeding and conveying device for precision dispensing equipment to achieve uniform and quantitative output of the medium.
4. Compact size, light weight, simple operation, easy installation and operation.
5. Multiple specifications of pumps adopt modular assembly method, suitable for various flow ranges.
Accuracy: ± 2%
Repetition accuracy:±1%
Maximum output pressure: see parameter table
Transportable medium:① Medium viscosity: ≤ 1000000cps② Medium pressure: ≤ 0.6MPa ③ Medium temperature: ≤ 80℃
to configure:
1) Motor: stepper motor/servo motor
2) Rotor material: 304 stainless steel (hardened treatment)
3) Stator material: FKM (Chinese name: fluororubber) is commonly used, and NBR (Chinese name: nitrile rubber)/EPDM (ethylene propylene diene monomer rubber) can be selected according to the medium
4) Pump body material: 304 stainless steel
5) Sealing ring material: FKM (Chinese name: Fluororubber) is commonly used
6) Bucket specification: 5 gallons (straight bucket and tapered bucket have different pressure plate configurations)
Location：
膠閥.jpg)